If you are tired of scouring rust from your chassis, frame, and other vital metal components use Mavcoat® Steel Shield, a corrosion prevention coating for protecting metal parts. It was initially developed and is still used to prevent corrosion from attacking the tube chassis in all classes of Ultra4 racing because it is tough enough to withstand the extreme environment and harsh conditions experienced during King of the Hammers or whatever the weekend trail runs can dish out. Unlike other coatings, it can be welded through without having to be removed, which saves time for builders, enthusiasts, and racers – especially when welding is necessary in the middle of a race. Not having to prep the metal surface could make the difference of coming in first versus second. The coating is not oily like other products, so it stays in place and does not run after application. It repels water, dirt, mud, and sand. Additionally, the polymer coating plates out on metal surfaces, which provides long-term lubrication in needed areas. Mavcoat® Steel Shield is transparent so you can easily see cracks in welds and metal caused by fatigue or damage. This coating is also used by metal fabrication companies to protect their newly made parts prior to shipment so customers receive corrosion-free components. Mavcoat® Steel Shield comes in an aerosol can making it fast and easy to apply. Overspray does not harm other parts that it may come into contact with such as, wires, harnesses, plastics, or paint. Use it and achieve many months of protection.